Roland VS-1680 - Page 50

8. Make the settings for the effects. Press [ ], [ ], [ ], and [ ] to
move the cursor. Rotate the TIME/VALUE dial to adjust each of the values.
Press [F3 (EFX A)] to make settings to EFFECT A (EFX1/2); press [F4 (EFX
B)] to make settings to EFFECT B (EFX3/4).
fig.02-27(rec_step3.eps)
9. Press [F2 (STEP→)]. You can return to the previous screen by pressing [F1
(STEP←)].
10. Determine whether or not the output is to be sent to the AUX bus. Press
[ ], [ ], [ ], and [ ] to move the cursor. Rotate the
TIME/VALUE dial to adjust each of the values.
fig.02-28(mix_step4.eps)
11. Press [F2 (STEP→)]. You can return to the previous screen by pressing [F1
(STEP←)].
Effect Switch
Send Level
Send Pan
Cursor
AUX Switch
AUX Send Switch
AUX Send Pan/
Balance
Cursor
Input Channel Track Channel
Chapter 2 Basic Operation
50