Getting Acquainted with the XPS-10
13
Using a USB Flash Drive
Copy to a USB Flash Drive
Insert USB Flash Drive
MP3, WAV, AIFF
Audio les that you’ve copied from your computer to a USB ash drive can be played (p. 28) or imported (p. 22).
* Use USB Flash Memory sold by Roland. We cannot guarantee operation if other products are used.
* The USB ash drive may become warm, but this is not a malfunction.
About a USB ash drive
In order to use a USB ash drive with the XPS-10, format it on the XPS-10 to
create the necessary folders (p. 34).
NOTE
When you execute this operation, all data saved on the USB ash drive
will be lost. If the USB ash drive contains important data, back it up to
your computer before initializing the USB ash drive.
Folders created after formatting
ROLAND
SONG LIST
IMPORT
Backup data is saved in this
folder.
Place audio les to be played
using AUDIO PAD in this folder.
Place audio les for Sample
Import in this folder.
Audio les that can be played
MP3
Format MPEG-1 audio layer 3
Sampling Frequency 44.1 kHz
Bit Rate
32 k, 40 k, 48 k, 56 k, 64 k, 80 k, 96 k, 112 k, 128 k,
160 k, 192 k, 224 k, 256 k, 320 kbps, VBR (Variable
Bit Rate)
WAV/AIFF
Sampling Frequency 44.1 kHz
Bit 8, 16, 24-bit
Audio les that can be used for Sample Import (wav only)
WAV
Sampling Frequency 44.1 kHz
Bit Rate 16-bit
MEMO
Use only single-byte alphanumeric characters in le names and folder
names.
Data saved in USB ash drive
A USB ash drive can hold audio les and backup data of the XPS-10’s
internal memory.
To Next Page
Loading...
