Roland XPS-10 - Data Management (UTILITY); Saving Data to USB Flash Drive (BACKUP); Restoring Data from USB Flash Drive; Returning to Factory Settings

Other Settings
33
Backing Up or Initializing Data (UTILITY)
Utility functions let you save user data to USB ash drive or restore data
from USB ash drive back to the XPS-10. You’ll also use these utility
functions when you want to return the XPS-10 to its factory settings, or
initialize USB ash drive.
MEMO
Use USB ash drive sold by Roland. We cannot guarantee correct
operation if other products are used.
Types of data that can be saved
When you save settings from the XPS-10 to USB ash drive, the following
settings are saved.
. User data for tones and performances
. Favorites
. System settings
. Imported WAV les
. User scale
Saving Data to USB Flash Drive (BACKUP)
Here’s how to save user data to USB ash drive (backup).
1. Press the [MENU] button.
The Menu screen appears.
2. Use the CURSOR [
K
] [
J
] buttons to select “UTILITY,” and
press the [ENTER] button.
The UTILITY screen appears.
UTILITY: [ENT]
Backup J
3. Use the CURSOR [
K
] [
J
] buttons to select “BACKUP,” and
press the [ENTER] button.
The name input screen appears.
Name: [ENT]
\
4. Use the CURSOR [
K
] [
J
] buttons to move the cursor to,
and use the VALUE [-] [+] buttons to change characters.
5. When you’ve nished specifying the name, press the
[ENTER] button.
The following screen appears.
Backup ?
[ENT]:Y [EXIT]:N
6. Press the [ENTER] button.
If you decide to cancel, press the [EXIT] button.
When the backup has been completed, you will return to the “UTILITY”
screen.
Restoring Saved Data from USB Flash Drive
Back into the XPS-10 (RESTORE)
Here’s how to restore backed-up user data from USB ash drive into the
XPS-10 (Restore.)
NOTE
All user data will be rewritten when you execute the Restore operation.
If the XPS-10 contains important data that you want to keep, you must
save it to a separate USB ash drive before you execute Restore.
1. Press the [MENU] button.
The Menu screen appears.
2. Use the CURSOR [
K
] [
J
] buttons to select “UTILITY,” and
press the [ENTER] button.
The UTILITY screen appears.
UTILITY: [ENT]
K
Restore
J
3. Use the CURSOR [
K
] [
J
] buttons to select “RESTORE,” and
press the [ENTER] button.
4. Use the VALUE [-] [+] buttons to select the le that you
want to restore, and then press the [ENTER] button.
The following screen appears.
Restore ?
[ENT]:Y [EXIT]:N
5. Press the [ENTER] button.
If you decide to cancel, press the [EXIT] button.
When the restore has been completed, you will return to the “UTILITY”
screen.
Completed.
Turn o power.
6. Turn the power of the XPS-10 o, then on again.
Returning to the Factory Settings
(FACTORY RESET)
You can return all of the XPS-10’s settings to the state they were in when
the instrument was shipped from the factory (Factory Reset.)
NOTE
If the XPS-10’s internal memory contains important data that you’ve
created, be aware that all of this user data will be lost when you execute
the factory reset operation. If you want to keep this data, save it to USB
ash drive before you continue.
1. Press the [MENU] button.
The Menu screen appears.
2. Use the CURSOR [
K
] [
J
] buttons to select “UTILITY,” and
press the [ENTER] button.
UTILITY: [ENT]
K Factory Reset J