Roland XPS-10 - Adding Effect Depth and Adjusting Volumes; Spaciousness and Reverb Controls; Adjusting Part Volumes

Playing the XPS-10
20
Adding spaciousness and reverberation
[CHORUS] slider
This adds spaciousness and depth to the sound.
Increasing the value deepens the chorus; decreasing the value decreases
the chorus depth.
Parameter Value
Chorus Level 0–127
MEMO
The eect is applied if the “Chorus switch” is turned “ON” in the eect
editing screen.
For details, refer to “SWITCH (Chorus switch)” (p. 27).
[REVERB] slider
You can add reverb (reverberation) to the sounds that you play from the
keyboard. By adding reverb, you can recreate the pleasant acoustics that
are typical of a performance in a concert hall or similar space.
Increasing the value deepens the reverb; decreasing the value decreases
the reverb depth.
Parameter Value
Reverb Level 0–127
MEMO
The eect is applied if the “Reverb switch” is turned “ON” in the eect
editing screen.
For details, refer to “SWITCH (Reverb switch)” (p. 27).
Adjusting the upper (part 1) and lower (part 2)
volume
SPLIT/DUAL [LOWER/2] slider
Adjusts the volume of the lower part in Split mode, or the volume of part 2
in Dual mode.
Parameter Value
Level (Part2) 0–127
MEMO
This also adjusts the volume of part 2 in 16-part mode.
NOTE
Changes you make are temporary, and are discarded if you turn o the
power or select another sound. If you want to keep the changes that
you made, save the performance (p. 27).
SPLIT/DUAL [UPPER/1] slider
Adjusts the volume of the upper part in Split mode, or the volume of part 1
in Dual mode.
Parameter Value
Level (Part1) 0–127
MEMO
This also adjusts the volume of part 1 in 16-part mode.
NOTE
Changes you make are temporary, and are discarded if you turn o the
power or select another sound. If you want to keep the changes that
you made, save the performance (p. 27).
Adjusting the AUDIO PAD volume
[AUDIO PAD] slider
Adjusts the volume of the AUDIO PAD section (rhythm pattern).
When playing an audio le from USB ash drive
Parameter Value
Audio Level 0–127
MEMO
The “Audio Level” value you adjusted is lost when you turn o the
power. If you want this value to be remembered even after the power is
turned o, edit the System Setting “Audio Level” (p. 31).
When playing a rhythm pattern
Parameter Value
Rhythm Level 0–127
MEMO
The rhythm pattern volume (Rhythm Level) cannot be saved.