Roland XV-5080. - Assigning a Different Patch to a Part

26
Try Out the Sounds
3
Make sure that the [1-16/17-32] indicator is dark, and then
press the PART SELECT [2/18] button to make the indicator
go dark (off).
fig.00-030.e_80
4
When you press the same button again, the indicator lights
and turns Part 2 back on.
Assigning a different Patch to a Part
This is how to change the Patch assigned to a Part in a Performance.
Here, we will switch the Patch in Part 2 of the Performance PR-
A:01Seq:Template to 018 (Slap Bass).
fig.00-031.e_80
1
At the PERFORM Play page, choose Performance “PR-
A:01Seq:Template.”
2
Press the [F3 (PART)] button.
3
Make sure that the [1-16/17-32] indicator is not lit, and then
press the PART SELECT [2/18] button to select Part 2.
The indicator will light, and the Part number will appear in the upper left of
the screen.
To select Parts 17–32, press
[1-16/17-32], getting its
indicator to light, and then
press the desired PART
SELECT [1/17]–[16/32]
b
utton.