Roland XV-5080. - Changing the MIDI Reception Channel of each Part

27
Try Out the Sounds
You can switch the Part by moving the cursor here and turning the VALUE
dial.
fig.00-032.e_80
4
Press the [ ]/[ ] button to move the cursor to Patch
Number.
5
Turn the VALUE dial to select 018 (Slap Bass).
Play your MIDI keyboard, and listen to how the sound has been changed.
* Pressing the [UNDO] button restores Number to its original value, reselecting the
original Patch.
6
Press the [EXIT] button to return to the PERFORM Play page.
Changing the MIDI Reception Channel of Each Part
1
Select the Performance you wish to use.
2
Press [F4 (MIDI)] button.
The Part MIDI page will appear.
3
Press the PART SELECT [1/17]–[16/32] button to select the
Part you wish to set.
To select Parts 17–32, press [1-16/17-32], getting its indicator to light, and
then press the desired PART SELECT [1/17]–[16/32] button.
The indicator will blink, and the Part number will appear in the upper left
of the screen.
fig.00-033.e_80
To select Parts 17–32, press
[1-16/17-32], getting its
indicator to light, and then
press the desired PART
SELECT [1/17]–[16/32]
b
utton.
You can also select a Part
for setting by pressing the
[ ]/[ ] button in the
PERFORM Play page. The
currently selected Part
number and the Patch or
Rhythm Set name will
appear in the lower right of
the screen.