Roland XV-5080. - Page 31

31
Try Out the Sounds
executed, it may not be necessary to set the receive channel.
4
Send a Bank Select MSB (Control Number 0) value of “87” to
the XV-5080.
If you want to switch Rhythm Sets, send “86” as the value.
5
Next, send a Bank Select LSB (Control Number 32) value of
“64.”
6
Send a Program Change with a value of “2.”
The Patch name appearing in the page changes to PR-A:002 Bright Piano.
fig.00-038.e_80
* Each Patch or Rhythm Set has a corresponding Bank Select number and Program
number, as shown below.
Patches
Patch Patch Bank Select Number
Group Number MSB LSB Program Number
USER 001–128 87 00 001–128
PR-A 001–128 87 64 001–128
PR-B 001–128 87 65 001–128
PR-C 001–128 87 66 001–128
PR-D 001–128 87 67 001–128
PR-E 001–128 87 68 001–128
PR-F 001–128 87 69 001–128
PR-G 001–128 87 70 001–128
CD-A 001–128 87 32 001–128
:::::
CD-H 001–128 87 39 001–128
XP-A *1 *1 *1 *1
: : : : :
XP-H *1 *1 *1 *1
* 1 Depends on the Wave Expansion Board installed.
Fixed Bank Select numbers are assigned to the Wave Expansion Board itself.