ROLEC OCPP0410 User Manual

Product Overview
EVQROCM-01-V01-R0 Installation and Operation Manual Quantum:EV OpenCharge
September 2020 Page 5 of 21
Safety Advice within this Manual
Rolec manuals use a system of warnings, cautions and notes.
x WARNINGS concern the safety of installers/end user and will be given before the
detail/instructions in the manual.
x CAUTIONS concern the potential for damage to the equipment and will be given
before the detail/instructions in the manual.
x NOTES are given to provide additional information and/or to highlight information of
importance. They will be given either before or after the detail/instructions as
appropriate and may use different wording (such as IMPORTANT) where emphasis is
required.
Warnings, Cautions and Notes may be repeated several times as appropriate and may
be preceded by a hazard symbol where appropriate.
Product Overview
The Quantum:EV OpenCharge is an OCPP compliant, smart charging unit which has been
designed to provide the user with a simple, smartphone interactive, EV charging solution
via an online application and/or RFID card/fob. The EV driver/Charger Operator can
control the charging activity of the unit using their mobile phone, and/or RFID card/fob, as
well as allowing them to monitor / record all their charging activity, data and history via
their driver application dashboard.
The Quantum:EV OpenCharge is available with the following power options:
Model Number
Specification
OCPP0410
Quantum EV OCPP Single Phase - 1x 3.6kW (16A)
OCPP0411
Quantum EV OCPP Single Phase - 1x 7.2kW (32A)
OCPP0420
Quantum EV OCPP Single Phase - 2x 3.6kW (16A)
OCPP0421
Quantum EV OCPP Single Phase - 2x 7.2kW (32A)
OCPP0412
Quantum EV OCPP Three Phase (Superfast) - 1x 11kW (16A)
OCPP0413
Quantum EV OCPP Three Phase (Superfast) - 1x 22kW (32A)
OCPP0422
Quantum EV OCPP Three Phase (Superfast) - 2x 11kW (16A)
OCPP0423
Quantum EV OCPP Three Phase (Superfast) - 2x 22kW (32A)
Refer to the Product Specification on page 6 for further details.
Features
x OCPP Compliant
x OLEV Grant Fundable under the Electric Vehicle Workplace Charging Scheme (WCS).
x Smart charging.
x Built-in AC overload protection (MCB).
x Built-in AC & DC fault protection (RCD).
x Built-in LED charging status indicator.
x Built-in LED area illumination.
x Built-in Class 1 MID compliant kWh metering.
x Built-in Modem and roaming sim or Ethernet connection.
x Built-in GPRS communication antenna.
x Fire retardant & impact resistant design.
x IP Rated.
x certified.

ROLEC OCPP0410 Specifications

General

Brand	ROLEC
Model	OCPP0410
Category	Battery Charger
Language	English