R62 / R62T / R65 / R65T - Rev. A 3
1 INTRODUCTION
1.1 FOREWORD
This user and maintenance manual is to be consulted by anyone who may be appointed to,
charged with and authorized to use the machine; the term "use" refers to any phase of the
machine's working cycle (from assembly and transport to maintenance operation to dismantling). It
is also intended for the employer, the managers and any officer of the company that will use the
machine: they will have to read it thoroughly and understand it fully so as to use it when complying
with part of the obligations on health and safety in the workplace. The employer, at whose plants
the machine is operating, as well as the managers and any officer within the company, must provide
any operators with suitable training and information (all information must be simple and
comprehensible, according to the foresight which can be reasonably expected of the intended
recipient) on its correct and safe use as well as on general and specific risks in the workplace and/or
inherent to the job itself. This manual can assist in such important task even though, for obvious
reasons, it cannot be considered as fully exhaustive as it is not strictly inherent to the actual
machine.
The manual consists in a number of sections, each of which has its specific purpose, and in
particular:
2 Machine features
3 Installation and Use
3.4.10 Maintenance
5 Safety
6 Dismantling
The word machine will hereafter indicate the item to be used by the purchaser and for which this
manual is written and given to the purchaser, so that he may use it in a correct and safe manner.
Before carrying out any operation on the machine (transport, installation, connections to utilities,
adjustments, operation, repair work, part replacement, dismantling, etc.) as well as before allowing
anyone to use the machine, usually laymen, carefully read the general and specific instructions
contained in this manual and ensure that its purposes and meaning are clear, so as to acquire the
necessary knowledge to correctly operate and maintain the machine, as well as to understand and
become familiar with the safety devices it is provided with, and finally the residual risks it presents,
and therefore to use it in a correct and safe manner.
Keep this manual and any attached document in a safe place (drawings, diagrams, etc.).
Should the manual be lost or worn out immediately request a copy to the manufacturer clearly
stating the identification details of the machine (year of construction, model, serial number, etc.).
This manual reflects the state of the art at the time the machine is launched into the market or
started up, and cannot be considered unsuitable just because it has been subsequently updated
following newly acquired experience or new technical solutions.
The manufacturer is not responsible for the suitability of the place where the machine is used nor for
any complementary service, regardless of the fact that instructions on correct installation are given
herein. The company reserves the right to update machines and manuals, but is not obliged to
update machines and/or manuals previously manufactured/drawn up.
This manual is an integral part of the machine and must accompany it should it be transferred or
sold for whatever reason, even for free.
To Next Page
Loading...