R62 / R62T / R65 / R65T - Rev. A 5
1.3 MAIN CASES FOR WHICH THE COMPANY DECLINES ANY RESPONSIBILITY
The manufacturing company declines any responsibility for damages to people, animals and
properties as well as for missed production due to:
• Use of the machine not in compliance with the intended use or with products different from
those expressly declared in this manual
• Installation not in compliance with the procedures illustrated in this manual
• Use of the machine by inadequately informed personnel and, where foreseen, inadequately
trained on correct and safe use of the same
• Maintenance, adjustments, settings, parts replacement, cleaning operations carried out by
inadequately informed and instructed personnel and, where foreseen, inadequately trained on
how to safely and correctly carrying out interventions
• Use of power supply that is different from what is provided for by this manual, or altogether
unsuitable
• Failure to perform maintenance and cleaning operations and checks, etc.
• Failure to comply or partial compliance with the instructions given in this manual
• Arbitrary modifications to the original features and standard equipment of the machine, without
prior formal authorisation by the manufacturing company
• Damages caused by tools, equipment, or other components both installed and not installed on
the machine, not supplied or in any case not foreseen or authorized by the manufacturing
company
• Failure to comply with the law and regulations in force in the country where the machine is to be
used
• Exceptional events or force majeure not ascribable to the manufacturing company
1.4 TERMINOLOGY
To better understand this manual, we hereby illustrate some of the terms used herein:
MANUFACTURER, PRODUCER: Machine manufacturer.
CLIENT, BUYER: physical or juridical person who has bought a machine that is either new or in such
conditions to be considered as new (that is complete with these original instructions and with the
original copy of the EC Declaration of Conformity)
USER: whoever is legally responsible for machine use; in most cases the client and the buyer are the
same person.
OPERATOR: any person appointed to use the machine; the term "use" refers to any stage of the
standard machine life cycle.
MACHINE: the object for which this manual is written and given to the purchaser, so that he may use
it in a correct and safe manner.
MACHINE USE: all the operations that can be reasonably connected to the machine during its whole
life in relation to its intended use as stated in this manual.
DOUGH: preparation for bread, pastry and pizza, previously mixed using the appropriate mixer.
ORDINARY MAINTENANCE: any and all operations necessary to correctly operate and keep the
machine, which do not require any special training or professional expertise due to their basic nature
and can therefore be carried out by the operator.
EXTRAORDINARY MAINTENANCE: operations that are necessary to correctly operate and keep the
machine which, due to their complexity and/or hazardous nature, require the intervention of
specialized, expert and suitably trained personnel who possesses the necessary technical and
regulatory knowledge to carry out state-of-the-art interventions in safe conditions.
DANGER AREA: any area within and/or around the machine where the presence of an exposed
person is a risk for the health and safety of such person.
To Next Page
Loading...