Need help?Do you have a question about the RollSeal RS-600 Series and is the answer not in the manual?
Key instructions to reduce the risk of severe injury or death during installation.
Instructions for fastening the assembled door to the clear opening, ensuring plumb and square.
Instructions and warnings for mounting the Manaras operator onto the RS-500/600 Series Doors.
Final steps to prepare the cooler door for operation, including setting limits and testing.
Instructions for operating the Manaras motor and important safety precautions.
Step-by-step procedure for adjusting the open and close limit switches for the Manaras operator.
Covers the installation and operation of the manual chain hoist for emergency door use.
Procedure for manually operating the door when using the Brother Operator.
Instructions for adjusting the motor brake due to wear from extended operation.
Comprehensive guide to the Emergency Egress feature, including installation and use.
Detailed wiring diagram for RS-500/600 Series Doors with Brother Motor.
Wiring diagram for the RollSeal Smart Controller (SC-325/SC-650) used with Brother motors.
Detailed wiring diagram specific to the SC-325 controller.
Wiring diagram for the RollSeal Condensation Management System (CMS).
General| Brand | RollSeal |
|---|---|
| Model | RS-600 Series |
| Category | Garage Door Opener |
| Language | English |
To Next Page
