Ropex CIRUS UPT-606 - Maintenance

Maintenance
UPT-606 Page 47
[X] As of software revision 100 and GSD Version v2.0:
Setting by means of the PROFIBUS parameter data
or the DPV1 protocol extension.
11 Maintenance
The controller requires no special maintenance.
Regular inspection and/or tightening of the terminals –
including the terminals for the winding connections on
the impulse transformer – is recommended. Dust depo-
sits on the controller can be removed with dry com-
pressed air.
Rotary coding swit-
ches
for
station address
Station address = 01
dec
Temperature
diagnosis
[X]
Temperature diagnosis: deactivated
Heatup timeout
[X]
Heatup timeout: deactivated
0
0
5
5
1
1
2
2
3
3
4
4
6
6
7
7
8
8
9
9
x 1
x 10
Top of housing