Rosemount 248 - MOUNTING

Reference Manual
00809-0100-4825, Rev BB
August 2005
2-3
Rosemount 248
MOUNTING Mount the transmitter at a high point in the conduit run to prevent moisture
from draining into the transmitter housing.
The Rosemount 248R installs directly to a wall or to a DIN rail.
The Rosemount 248H installs
• In a connection head or universal head mounted directly on a sensor
assembly
• Apart from a sensor assembly using a universal head
• To a DIN rail using an optional mounting clip
Mounting a Rosemount 248H to a DIN Rail
To attach a head mount transmitter to a DIN rail, assemble the appropriate rail
mounting kit (part number 00248-1601-0001) to the transmitter as shown in
Figure 2-2.
Figure 2-2. Assembling Rail Clip
Hardware to a Rosemount 248
Transmitter
Mounting
Hardware
Rail Clip
248_248-06A