Ross Ultripower - Monitoring Via Dashboard; Monitoring the PSU Slots; Monitoring the Ultripower PSU out Ports

28 • Monitoring the Ultripower Ultripower User Guide (v4.0)
Monitoring via DashBoard
The read-only fields in DashBoard enable you to monitor the PSU slots in the chassis.
For More Information on...
• the status tabs and fields in DashBoard, refer to the section “Status Tabs Overview” on page 29.
• the Log tab entires, refer to Tabl e 7.5.
Monitoring the PSU Slots
If the Alarm on missing PSU option is enabled, the PSU tab in DashBoard reports the status of each slot in the
chassis. Refer to the section “PSU Tab” on page 30 for a list of possible messages in these fields.
To enable monitoring of the PSU slots
1. Locate the Ultripower in the Tree View of DashBoard.
2. Expand the Ultripower node.
3. Double-click the Ultripower sub-node.
The Ultripower tabs display in the right-half of the DashBoard window.
4. Select the Setup tab.
5. Select the Alarm on missing PSU check box.
To view the status of a PSU slot via DashBoard
1. Locate the Ultripower in the Tree View of DashBoard.
2. Expand the Ultripower node.
3. Double-click the Ultripower sub-node.
4. Select the PSU tab.
The PSU Slot area displays a read-only field for each slot in the Ultripower chassis.
Monitoring the Ultripower PSU OUT Ports
You can use DashBoard to monitor the overall status of each PSU OUT port. Refer to the section “PSU Tab” on
page 30 for a list of possible messages in these fields.
To view the status of a PSU OUT port via DashBoard
1. Locate the Ultripower in the Tree View of DashBoard.
2. Expand the Ultripower node.
3. Double-click the Ultripower sub-node.
4. Select the PSU tab.
The Outputs area displays a read-only field for each PSU OUT port on the Ultripower rear panel.
PORT SPEED Yellow When lit yellow, this LED indicates a 100Base-T Ethernet
connection.
Off When unlit, this LED indicates a 10Base-T Ethernet connection.
Table 6.2 Rear Panel — ETHERNET LEDs
LED Status Description