Ross ULTRIX-FR12 - Maximum Power Ratings; Input Signal Specifications

54 • Technical Specifications ULTRIX-FR12 Installation Guide (v4.0)
Maximum Power Ratings
 Refer to the Ultrix Configuration Tool for details on the required number of Ultripower Power
Supply units for the ULTRIX-FR12.
Table 14 outlines the maximum power ratings for fully loaded ULTRIX-FR12.
Inputs
2160 P 30
  
2160 P 29.97
  
2160 P 23.98
  
2160 P 25
  
2160 P 24
  
12G (UHD)
2160 P 50
  
2160 P 59.94
  
2160 P 60
  
a. First stream is processed (same as Level B).
Table 14 Technical Specifications — Maximum Power Ratings
Item Specifications
ULTRIX-FR12 with 16 ULTRIX-HDX-IO blades Typical: 2000W
Max: 2500W
ULTRIX-FR12 with 16 ULTRIX-IP-IO blades Typical: 1890W
Max: 2400W
ULTRIX-FR12 with 16 ULTRIX-SFP-IO blades Typical: 1700W
Max: 2200W
Table 15 Technical Specifications — Inputs
Item Specification
Standard Input HD-BNC
Signal Type (SDI
Formats)
270MB/s
1.5GB/s
3GB/s
12GB/s
Impedance 75ohm
Max. Input Level 880mV
Return Loss Per SMPTE 2082-1
Table 13 Technical Specifications — Supported Formats
Resolution
(lines)
Interlace /
Progressive
Frame Rate
(Hz)
SDI
Routing UltriMix Ultriscape Gearbox