EasyManua.ls Logo

Ross ULTRIX-FR12 - Glossary of Terms

Ross ULTRIX-FR12
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ULTRIX-FR12 Installation Guide (v4.0) Glossary • 67
Glossary
The following terms are used throughout this guide:
Connection Point — setting to define a communication connection between an ULTRIX-FR12 and a
device in the routing system.
Crosspoint a switch within a matrix. For example, the connection of signal IN 1 to OUT 1 requires
one crosspoint.
Destination — a label applied to a router output (or group of outputs).
Device — a physical, virtual, or software application that may include multiple sources,
destinations, senders, or receivers.
Hard Panel — a physical hardware panel of buttons that is used to control the routing system.
Head — An OUT port on the router that is assigned as an Ultriscape (Multiviewer) output.
IP Address — a setting that defines the Internet protocol address of a device within a network.
Logical (virtual) Label — a name for a group of routing system inputs or outputs.
Logical (virtual) Routing — the action of switching a group of otherwise unrelated signals via a
common label (name).
Map — a table that defines the allocation of names (labels) to router input and output sockets.
Matrix — the part of the routing system that performs the actual signal switching tasks.
Partition — matrices may be partitioned to behave as smaller independent matrices.
Picture in Picture (PIP) — a sub-picture in an Ultriscape (Multiviewer) output.
Remote Control Panel (RCP) — a physical hardware panel of buttons that is used to control the
routing system.
Resource — a source or destination of a router configuration; an external device providing some
conversion functionality for use within the routing control system.
Soft Panel — a DashBoard interface that represents a panel of buttons that is used to control the
routing system.
Source — a label applied to a router input (or group of inputs).
T-Bus — the Ross Video proprietary routing communication method via a defined physical
interface.
UltriClean — clean switch functionality of the ULTRIX-FR12 routers.
Ultricore — refers to the Ultricore-CC and the Ultricore-BCS unless otherwise stated.
UltriMix — SDI embedded audio manipulation sub-system of the ULTRIX-FR12 routers.
Ultriscape — licensed Multiviewer option for ULTRIX-FR12 routers.
UltriSpeed — licensed 12Gbps SDI video option.
UltriSync — a per input licensed frame synchronizer.

Table of Contents

Other manuals for Ross ULTRIX-FR12

Related product manuals