Rosslare AC-F Series User Manual

Operation
AC-F/G4x Series Installation and Programming Manual 23
4. Operation
•
In the Operation chapter, “code” refers to a PIN code or
proximity card depending on the unit you have.
•
Memory slots can be a proximity card or PIN code dependi
ng on
the unit you have.
4.1
Modes of Operation
In case of power failure, once the power is restored, the
controller returns to Normal mode for security reasons
.
There are three modes of operation.
4.1.1 Normal Mode
The
left LED is green.
Normal mode is the default mode. In Normal mode, the door is
locked until a valid primary code is presented to the controller.
The controller can only be programmed in Normal mode.
4.1.2 Secure Mode
The
left LED is red.
Only Secure and Master users can access the premises in
Secured mode.
A Secure user must enter the Primary and Secondary codes to
gain entry. After entering the Primary code, the right LED flashes
Red
Green

Rosslare AC-F Series Specifications

General

Brand	Rosslare
Model	AC-F Series
Category	Controller
Language	English