Rosslare AC-F Series User Manual

Programming
AC-F/G4x Series Installation and Programming Manual 37
5.5
Changing the Programming Code
•
The Programming code cannot be erased; the code 0000 is
invalid and does not erase the Programming code.
•
The factory default 4-digit Programming code is 1234.
To change the Programming code:
1.
Enter Programming mode.
2.
Press 3 to enter Menu 3.
The left LED turns green.
3.
Enter the new 4-digit Programming code.
You hear three beeps.
The system returns to Normal mode.
Green
Green
Green
Green

Rosslare AC-F Series Specifications

General

Brand	Rosslare
Model	AC-F Series
Category	Controller
Language	English