AY-B9350 User Manual 31
3.3.1.9. Saving
After completing all registering processes, press [Save] button. At this point, if [Cancel]
or [BACK] button is pressed without pressing [Save] button, the user won’t be saved.
The following shows LCD messages which can be displayed during registering processes.
When [Save] button is pressed,
Normally registered
When [Save] button is pressed,
User registration failed
: None of authentication method using fingerprint,
face, card or password is registered
When [Authentication Method] button is pressed,
No Authentication Method is registered
When [Save] button is pressed,
User registration/modification failed
: Operation is under Network mode but the terminal is
not connected to the server
To Next Page
Loading...
