To Next Page

To Previous Page

Controller Operation

38 AYC-Qx4 Family Installation and Programming Manual

No.

Menu Description Default

digits

4-8

digits

6 Changing Door Release Time 0004

Define auxiliary inputs/outputs 2004

Set Lockout 4000

Backlight Behavior 5100

7 Enrolling PIN Code N/A

8 Deleting PIN Code N/A

9 Code assignment with

strike/auxiliary

N/A

0 Return to factory defaults or

change PIN code Length

N/A

You will find a complete description and instructions for each of the

above menu items on the following subsections.

5.9.1 Entering Programming Mode

• The unit must be in Normal mode to enter Programming mode.

• The factory 4-digit Programming code is 1234.

• If a Programming code is not entered within five seconds, the unit

returns to Normal mode.

To enter Programming mode:

1. Press # twice.

The left LED turns off and the right LED turns

red.

2. Enter your 4-digit Programming code.

The right LED turns green.

Green

Red

Rosslare AYC-Q Series Installation And Programming Manual

Other manuals for Rosslare AYC-Q Series