Rosslare AYC-Q Series Installation And Programming Manual

Controller Operation
AYC-Qx4 Family Installation and Programming Manual 57
5. Enter your 4-digit Programming code to confirm the deletion.
If the Programming code is valid, you hear three beeps and the
unit returns to Normal mode.
If the Programming code is invalid, you hear a long beep and the
unit returns to Normal mode.
5.9.14 Relay Codes Assignment
When a primary code is enrolled for any user, the user is authorized
to activate the Lock Strike relay. However, different user codes may
be set to operate the auxiliary relay instead or operate both the Lock
strike and auxiliary relay. Assignment of such codes is achievable for
any valid user code entered in the controller.
There are two methods to assign relay codes to users: a standard
method and a search method.
5.9.15 Relay Code Assignment using Standard Method
To assign relay code using the Standard method:
1. Enter Programming mode.
2. Press 9 to enter Menu 9.
The left LED turns green and the right LED
turns orange.
3. Enter the 3-digit user slot for code assignment.
The left LED flashes green.
4. Enter the assignment digit for the current user slot:
 1 activates the Lock Strike relay only default
 2 activates the Auxiliary relay only
 3 activates the Lock Strike and Auxiliary relays
Green
Orange
Green
Orange
Green

Rosslare AYC-Q Series Specifications

General

Brand	Rosslare
Model	AYC-Q Series
Category	Controller
Language	English