Rosslare AYC-Q Series Installation And Programming Manual

Controller Operation
AYC-Qx4 Family Installation and Programming Manual 51
3. Enter one of the following codes:
 5000 – Backlight off
 5100 – Backlight on (default)
 5200 – Backlight is off, activates for 10 seconds when
a key is
pressed, after which it dims until off
 5300 – Backlight is dimmed, activates for 10 seconds when a
key is pressed, after which it returns to a dimmed level
5.9.12 Enrolling Primary and Secondary Codes
5.9.12.1 Primary Codes
 Primary codes can only be enrolled to an empty user slot,
meaning a slot where there is no existing Primary code.
 Primary codes must be unique, meaning one user’s Primary code
may not be the same as other user’s Primary code.
 Primary codes cannot be the same as any system codes, such as
the Normal/Secure code or Lock Strike code.
 Users who hold a Primary code can gain entry only during Normal
mode.
5.9.12.2 Secondary Codes
 Secondary codes can only be enrolled to a user slot that already
has a Primary code enrolled but has no Secondary code.
 Secondary codes do not have to be unique, meaning multiple
users can all hold the same Secondary code.
 Secondary codes cannot be the same as any system codes, such
as the Normal/Secure or Lock Strike codes.
 Users who hold Secondary codes can gain entry in any mode of
operation.

Rosslare AYC-Q Series Specifications

General

Brand	Rosslare
Model	AYC-Q Series
Category	Controller
Language	English