Rosslare AYC-Q Series Installation And Programming Manual

Controller Operation
50 AYC-Qx4 Family Installation and Programming Manual
To set the lockout feature:
1. Enter Programming mode.
2. Press 6 to enter Menu 6.
The left LED flashes green.
3. Construct a code using the following
instructions:
 Second digit
Sets the number of wrong code attempts, which causes a
Lockout between 0 and 9 attempts.
 Third and fourth digits
Sets the Duration of the lockout, between 00 and 99; the
value is multiplied by ten, resulting in 0 to 990 seconds.
5.9.11 Setting the Backlight Behavior
The controller allows you to define the way the unit’s backlight
works.
To set the backlight behavior:
1. Enter Programming mode.
2. Press 6 to enter Menu 6.
The left LED flashes green.
Green
Green
Green
Green
Green
Green

Rosslare AYC-Q Series Specifications

General

Brand	Rosslare
Model	AYC-Q Series
Category	Controller
Language	English