Rosslare AYC-Q Series Installation And Programming Manual

Controller Operation
54 AYC-Qx4 Family Installation and Programming Manual
5.9.12.5 Enrolling Secondary Codes using the Code Search
Method
The Code Search feature enables you to quickly enroll a Secondary
code to a user who already has a Primary code.
To enroll secondary codes using the Code Search method:
1. Enter Programming mode.
2. Press 7 to enter Menu 7.
The right LED turns orange.
3. Enter 000 as the 3-digit user slot number.
The right LED flashes orange.
4. Perform one of the following:
 Enter the PIN code belonging to the user
for whom you wish to add a Secondary
code.
 Present the user card belonging to the user for whom you
wish to add a Secondary code.
The left LED flashes red.
If the Primary code entered is not valid, you hear a long beep and
the unit continues to wait for a valid Primary code.
5. Perform one of the following:
 Enter the PIN code to be used as the
Secondary code.
 Present the user card to be used as the Secondary code.
Red
Orange
Orange
Orange
Green

Rosslare AYC-Q Series Specifications

General

Brand	Rosslare
Model	AYC-Q Series
Category	Controller
Language	English