Controller Functionality
AYC-Qx4 family manual Page 55
Mode/Transmit Door/Program
Green
• The Mode LED will flash red
• The Door LED will flash
orange
5) Enter your Programming
Code to confirm the deletion.
If the Programming Code is valid, you will hear three beeps and
the unit will return to Normal Mode.
If the Programming Code is invalid, you will hear a long beep and
the unit will return to Normal Mode.
Note:
• It is recommended that a record be kept of added
and deleted users so that it will be easier to keep track
of which user slots are empty and which user slots are
not.
Relay Codes Assignment
When a primary code is enrolled for any user, the user is
authorized to activate the Lock Strike relay. However, different
user codes may be set to operate the auxiliary relay instead or
operate both the Lock strike and auxiliary relay. Assignment of
such codes is achievable for any valid user code entered in the
controller.
There are two methods to assign relay codes to users: a standard
method and a search method.
Relay Code Assignment using Standard Method
1) Enter the programming mode.
2) Depress 9 to enter Menu 9.
9
To Next Page
Loading...
Need help?
General
