Rotax 912 Series Operator's Manual

EGT
Exhaust gas temperature
Max. 880 °C (1616 °F)
Conventional
coolant
See also Chapter 2.3.
Applicable for engine S/N without Suffix -01.
Coolant temperature: (coolant exit temperature)
Max. 120 °C (248 °F)
Cylinder head temperature
Max. 135 °C (275 °F)
Permanent monitoring of coolant temperature and cylinder head
temperature is necessary.
Waterless coolant
Cylinder head temperature
Max. 135 °C (275 °F)
Permanent monitoring of cylinder head temperature is necessary.
Conventional
coolant
Applicable for engine S/N with Suffix -01.
Coolant temperature limit
measured in cylinder head
Engine type
Max. 120 °C (248 °F) 912 S/ULS
Permanent monitoring of coolant temperature is necessary.
Engine start, oper-
ating temperature
Max. 50 °C (120 °F) (ambient temperature)
Min. -25 °C (-13 °F) (Oil temperature)
Page 2-6
November 01/2016
BRP-Rotax Effectivity: 912 Serie
Edition 4 / Rev. 0

Rotax 912 Series Specifications

General

Redline	5800 rpm
TBO	2000 hours
Displacement	1211 cc
Bore	79.5 mm
Stroke	61 mm
Power Output	80 hp (59.6 kW)
Compression Ratio	9.0:1
Fuel Type	Avgas 100LL
Ignition System	Dual electronic ignition
Fuel System	Fuel Injected
Oil System	Dry sump
Engine Type	4-cylinder, horizontally opposed, 4-stroke