Rotex Solaris - Page 44

64 pages

To Next Page

To Previous Page

5 x Control unit operation

FA ROTEX Solaris - 08/2007

Fig. 5-6 Set-up menu

Main Page

Table of Contents3
Safety5
Refer to the Manual5
Warning Signs and Explanation of Symbols5
Danger Prevention6
Intended Use6
Instructions for Working Safely6
Product Description7
Design and Components of the Solaris System7
Brief Description8
System Components9
Control and Pump Unit9
Optional Flow Controller Flowguard and Flow Controller Flowsensor9
Connection Pipes9
Other Mounting Accessories10
Installation12
System Concepts12
Installing the Control and Pump Unit13
Mounting the Pump Unit13
Installing the Sensors17
Installing the Temperature Sensor18
Installing the Connection Pipes19
Fitting the Connection Pipe to the Solar Panel19
Connect Several Sanicube Hot Water Storage Tanks20
Installing the Common Return Flow Pipe21
Installing the Solar Panel Components22
Installing the Supporting Structure for Subsequent Installation on the Roof23
Installing the Supporting Structure for Subsequent Installation on a Flat Roof27
Installing the Supporting Structure for Subsequent In-Roof Installation27
Installing the First Solar Panel27
Installing the Other Solar Panels28
Installing the Equipotential Bonding Terminal30
Running the Connection Pipes and Solar Panel Temperature Sensor Cable through the Roof30
Installing the Solar Panel Temperature Sensor33
Uninstalling the Solar Panels34
Additional Notes about Connection Pipes34
Start-Up35
Operating Solaris Systems Without a Flowsensor35
Operation of Solaris Systems with a Flowsensor36
Control38
Operating and Display Elements38
Controller Operating Principle38
Pump Operation38
Booster Function for High Solar Panel Temperatures39
Switch-On Inhibit Function39
Pump Kick Function39
Manual Operation39
Solaris Flowsensor40
Output Calculation, Maximum Values and Yield Count40
Speed Control of Circulation Pump P140
Overall Reset Function41
Frost Protection Function41
System Leakage Protection Function41
Adjustments and Menu Guidance42
Display During Start-Up42
Display During Operation43
Set-Up Menu43
Password Protection45
Language Selection46
Adjusting and Resetting Parameters46
Burner Inhibit Contact46
Manual Adjustment of Pump Speed Control46
Correcting Values for Measurement Points46
Recommended Settings47
Standard Parameter Values, Recommended Adjustment Ranges47
Other Adjustments of Your Solaris System47
Recommended Settings for Auxiliary Heating Via External Heat Sources or the Electric Heater, Burner Inhibit Contact48
Tips for Optimised User Behaviour49
Domestic Water Hygiene49
Faults and Disturbances50
Isplay of Events50
Troubleshooting51
Hydraulic System Integration53
Technical Data61
List of Keywords63

Rotex Solaris - Page 44

Table of Contents

Related product manuals