Rotex Solaris User Manual

2 x Product description
7
FA ROTEX Solaris - 08/2007
2 Product description
2.1 Design and components of the Solaris system
Fig. 2-1 Standard design of a ROTEX Solaris system (ROTEX recommends a two-way connection)
1 Cold water connection pipe
2 Domestic water (hot) distributor
3 Stainless steel corrugated pipe heat exchanger for domestic water (hot)
4 Stainless steel corrugated pipe heat exchanger for generating heat
(storage tank charging)
5 Immersion sleeve for storage tank temperature sensor
6 Fill level display
7 Filling and draining cock
8 Solaris R3 differential temperature control
9 Solar return flow pipe (at the bottom of the solar panel/VA 18 Solar)
10 Solaris solar panel array
11 Solar feed pipe (at the top of the solar panel/VA 15 Solar)
12 Thermal mixer valve (prevents scalding; installed by the customer)
13 Anti-siphon valve
14 Solaris feed multilayer pipe
15 Stainless steel corrugated pipe heat exchanger for heating support
16 Insulating hose sleeve for stainless steel corrugated pipe heat exchanger
for heating support
17 Solaris return flow connection
18 Immersion sleeve for Solaris return flow temperature sensor
19 Equipotential bonding terminal cable connection (with valve attachment)
for storage tank extension
20 Safety overflow connection
I Two-way connection for 2 to 5 solar panels
II One-way connection for 2, max for 3 solar panels (not for in-roof)
A Area with water for domestic use
B Solar area
C Heating support area
TR Solaris return flow temperature sensor
TS Solaris storage tank temperature sensor
TK Solaris solar panel temperature sensor
TV Solaris feed temperature sensor
RPS3Control and pump unit
FLS Solaris flow sensor (flow rate measurement) or Solaris FlowGuard
(flow rate setting)
PS1 Solaris circulation pump
PS2 Booster pump

Rotex Solaris Specifications

General

Brand	Rotex
Model	Solaris
Category	Heating System
Language	English