What to do if Roundup Toaster flashes “HI” but buns don't toast right?
If the Roundup Toaster control display flashes “HI” continuously but the buns are not toasting properly, re-secure the platen thermocouple connection to the control board. If the control display still reads “HI”, check the thermocouple for continuity. If problems persist, contact your maintenance person or an authorized service agency for service.
Why does my Roundup Toaster flash “HI” and “LO”, then “HI” and “USE”?
If the Roundup Toaster control display flashes “HI” and “LO” at a cold start, then “HI” and “USE” after 20–30 minutes, re-secure the auxiliary thermocouple connection to the control board. If the control display continues to read “HI” and “LO” or “HI” and “USE”, check the thermocouple for continuity. If the issue continues, contact your maintenance person or an authorized service agency for assistance.
Overview of the VCT-2000, warranty coverage, exclusions, and service access.
Essential precautions for safe operation, including electrical hazards and grounding.
Guide for using the toaster, setting controls, and temperature adjustments.
Detailed steps for daily cleaning of the toaster and care for release sheets/belt wraps.
A table listing common problems, their causes, and corrective actions.
Details warranty, exclusions, and procedures for handling shipment damage.
To Next Page
General
