OPC90 Server
file name. When FILE_TYPE is set (1), OPC90 will load the Bailey function block
onfiguration data from files that have the “CFG” extension. These files are of
90 will automatically
ppend the “CFG” extension if it is missing. Including the “CFG” extension in the
ss an alternative directory path is
cluded as part of the file name. Following are some example load commands:
Actio
c
the format generated by the ABB Bailey CADEWS software and its derivatives.
When the file name is included in the command, OPC
a
file name will override the current FILE_TYPE tag setting. The “CFG” files are
loaded from the “ABB” subdirectory unle
in
Command n
LOAD Load res currently add sed module.
LOAD SLC Load currently addressed module from a file called “SLC.C90”.
LOAD SLC.CFG Load res called “SLC.CFG”. currently add sed module from a file
LOAD ROLLER 1 4 d node 4 mo6 Loa ring 1 dule 6 from a file called “ROLLER.C90”.
Cancel Comman
mman e viously s
r LOA a to
ance evio co
Command Action
d
Use this co d to canc l a pre tarted command. Some commands
like SAVE o
be sent to c
D mig
l the pr
ht t ke minutes
usly started
complete. The cancel command can
mmand.
CANCEL Cancels the previously entered and active command.
Read Command
ma read ng a Bailey
win om rea
Actio
Use this com nd to an existi function block configured in
module. Follo
g are s e example d commands:
Command n
READ Read dres currently ad sed function block.
READ 30 Read ck 3 function blo 0 from currently addressed module.
READ 40 1 10 20 Read ck 4 function blo 0 from ring 1 node 10 module 20.
Get Command
this comma ad ctio de
by a g e ule. No Bailey modules,
quest d nu tent with the
n code n . F with a Bailey COM module specifying
function code 21 for block 0 will return ecause configuring function
t block a rre
funct o t be con number.
so le omman
A
Use nd to re default fun n block data for the any function co
supported
the get re
iven Bail
must inclu
y mod te that for some older
e a block
or example
mber value that is consis
functio umber
an error b
code 21 a 0 is illeg l. More cu nt modules will return the default data
even if the ion code c uld no figured at the indicated block
Following are me examp get c ds:
Command ction
GET G e ns for cur lock and
a
et default sp cificatio rently addressed function code, b
ddress.
GET 80 Get default specifications for function code 80 for current address.
GET 30 1 32 30 Get default specifications for function code 30 for ring 1 node 32 module 30.
Write Command
The RoviSys Company Version 7.0 Page 51
To Next Page
Loading...