58
TRANSACTION EXAMPLES FOR OPERATING THE CASH REGISTER
NOTE: Turn the key to the "REG" (REGISTER) position for registering sales transactions.
IMPORTANT: It is not necessary to press the Decimal Point when ringing up a price.
REMINDER: If Clerk Numbers are programmed, be sure to ENTER the (CLERK #), then PRESS the
[CLERK/FS SHIFT] key before ringing up a sale.
In the examples below, Department 1 is programmed as taxable with 6% (TAX 1) rate and Department 2 is programmed
for no tax and Clerk #1 is used.
EXAMPLE 20: MINUS PERCENTAGE DISCOUNT SALE:
VERSION 1: If no tax is programmed in your cash register, ring up a $1.00 item in Department 2 and apply a
pre-grogrammed discount rate of 10%:
10-15-2002 MC #:1234
1. ENTER (100), then PRESS the [DEPARTMENT 2] key. DEPT 2 *1.00
2. PRESS the [-%/RA] key. If the Minus Percentage COUPON *-0.10
Discount Rate is NOT programmed, type in the -----------------------------------------
discount rate before pressing the [-%/RA] key.
TOTAL
*0.90
3. PRESS the [AMT TEND/TOTAL] key. CASH *0.90
AM10-59 0039
VERSION 2: When ringing a taxable item with a percentage discount, tax will automatically be charged on the
discounted amount (the amount after the percentage discount is deducted).
10-15-2002 MC #:1234
1. ENTER (100), then PRESS the [DEPARTMENT 1] key.
2. PRESS the [-%/RA] key. If the Minus Percentage DEPT 1 *1.00 T1
Discount Rate is NOT pre-programmed, type in the COUPON *-0.10
discount rate before pressing the [-%/RA] key. *0.05 T1
3. PRESS the [AMT TEND/TOTAL] key. -----------------------------------------
TOTAL
*0.95
CASH *0.95
AM10-59 0040