59
TRANSACTION EXAMPLES FOR OPERATING THE CASH REGISTER
NOTE: Turn the key to the "REG" (REGISTER) position for registering sales transactions.
IMPORTANT: It is not necessary to press the Decimal Point when ringing up a price.
REMINDER: If Clerk Numbers are programmed, be sure to ENTER the (CLERK #), then PRESS the
[CLERK/FS SHIFT] key before ringing up a sale.
In the examples below, Department 1 is programmed as taxable with a 6% (TAX 1) rate and Department 2 is
programmed for no tax and Clerk #1 is used.
EXAMPLE 21: PLUS PERCENTAGE SALE:
VERSION 1: If no tax is programmed in your cash register, ring up a $1.00 item in Department 2 and apply a
pre-programmed Plus Percentage Rate of 10%:
10-15-2002 MC #:1234
1. ENTER (100), then PRESS the [DEPARTMENT 2] key. DEPT 2 *1.00
2. PRESS the [+%/PO] key. If the Plus Percentage Rate ADD ON 10.00 %+
is NOT pre-programmed, type in the plus percentage *0.10
rate before pressing the [+%/PO] key. -----------------------------------------
3. PRESS the [AMT TEND/TOTAL] key.
TOTAL
*1.10
CASH *1.10
AM10-59 0041
VERSION 2: When ringing a taxable item with a Plus Percentage the tax will automatically be charged on the
amount after the plus percentage is added.
10-15-2002 MC #:1234
1. ENTER (100), then PRESS the [DEPARTMENT 1] key. DEPT 1 *1.00 T1
2. PRESS the [+%/PO] key. If the Plus Percentage Rate ADD ON 10.00 %+
is NOT pre-programmed, type in the Plus Percentage *0.10
Rate before pressing the [+%/PO] key. *0.07 T1
3. PRESS the [AMT TEND/TOTAL] key. -----------------------------------------
TOTAL
*1.17
CASH *1.17
AM10-59 0042