60
TRANSACTION EXAMPLES FOR OPERATING THE CASH REGISTER
NOTE: Turn the key to the "REG" (REGISTER) position for registering sales transactions.
IMPORTANT: It is not necessary to press the Decimal Point when ringing up a price.
REMINDER: If Clerk Numbers are programmed, be sure to ENTER the (CLERK #), then PRESS the
[CLERK/FS SHIFT] key before ringing up a sale.
In the examples below, Department 1 is programmed as taxable with a 6% (TAX 1) rate and Clerk #1 is used.
EXAMPLE 22: USE OF THE ERROR-CORRECT [VOID] KEY:
10-15-2002 MC #:1234
Corrects the last entry run up during a sale. Ring up
a $1.00 item in Department 1, then use the [VOID] key to DEPT 1 *1.00 T1
cancel this entry and ring up a $10.00 in Department 1 VOID/CORR
to register a new entry: DEPT 1 *-1.00 T1
DEPT 1 *10.00 T1
1. ENTER (100), then PRESS the [DEPARTMENT 1] key. *0.60 T1
2. PRESS the [VOID] key. ------------------------------------------
3. ENTER (1000), then PRESS the [DEPARTMENT 1] key.
TOTAL
*10.60
4. PRESS the [AMT TEND/TOTAL] key. CASH *10.60
AM 9-33 0036
EXAMPLE 23: VOIDING A SALE - (Void a $1.00 item in Department 1): 10-15-2002 MC #:1234
VOID/CORR
1. ENTER (100), PRESS the [VOID] key, then PRESS DEPT 1 *-1.00 T1
the [DEPARTMENT 1] key. *-0.06 T1
2. PRESS the [AMT TEND/TOTAL] key. ------------------------------------------
TOTAL
*-1.06
CASH *-1.06
AM 9-34 0037
EXAMPLE 24: VOIDING A MULTIPLICATION SALE - (Void a $1.00 item in Department 1 three times):
10-15-2002 MC #:1234
1. ENTER (3), then PRESS the [QTY/DATE] key.
2. ENTER (100), PRESS the [VOID] key, then PRESS 3 X
the [DEPARTMENT 1] key. 1.00 @
3. PRESS the [AMT TEND/TOTAL] key. VOID/CORR
DEPT 1 *-3.00 T1
*-0.18 T1
------------------------------------------
TOTAL
*-3.18
CASH *-3.18
AM 9-35 0038