Royal Alpha 9180sc - PLU Sales and Price Overrides

64
TRANSACTION EXAMPLES FOR OPERATING THE CASH REGISTER
NOTE: Turn the key to the "REG" (REGISTER) position for registering sales transactions.
IMPORTANT: It is not necessary to press the Decimal Point when ringing up a price.
REMINDER: If Clerk Numbers are programmed, be sure to ENTER the (CLERK #), then PRESS the
[CLERK/FS SHIFT] key before ringing up a sale.
In the examples below, Department 1 is programmed as taxable with a 6% (TAX 1) rate and Clerk #1 is used.
EXAMPLE 32: PLU SALE - (Assume the PLU # is preset for the price of $1.99 in Department 1. Ring up the PLU #1):
10-15-2002 MC #:1234
1. ENTER (1), then PRESS the [PLU] key. PLU No 001 *1.99 T1
2. PRESS the [AMT TEND/TOTAL] key. *0.12 T1
-----------------------------------------
Note: PLUs follow the same procedure for ringing up TOTAL *2.11
Coupons, Refunds, Minus Percentage Discounts, CASH *2.11
Plus Percentages, etc. as described throughout
the section for Transaction Examples For PM 1-14 0052
Operating The Cash Register.
Temporarily overriding a PLU PRICE: If you would like to enter a different price than what is programmed into a PLU #:
ENTER the (DESIRED PRICE), PRESS the [PLU ALT] key, ENTER the (PLU #), then PRESS the [PLU] key. The
letters "*PRICE*" will appear above the price of the PLU # to indicate the overriding of a PLU price.
EXAMPLE 33: PLU SALE WITH PLU DESCRIPTION - (PLU #1 has been programmed with the description "apple"):
10-15-2002 MC #:1234
1. ENTER (1), then PRESS the [PLU] key.
2. PRESS the [AMT TEND/TOTAL] key. CLERK 1
APPLE *1.99
-----------------------------------------
TOTAL *1.99
CASH *1.99
AM 2-07 0042
EXAMPLE 34: OVERRIDING A PLU SALE - If you need to enter a different price than what is programmed into a PLU
#: Enter the price (100), press the [PLU ALT] key, enter the [PLU #], then press the [PLU] key. The
word *PRICE* appears above the PLU description or PLU #:
10-15-2002 MC #:1234
1. ENTER the price (100), PRESS the [PLU ALT] key,
ENTER the [PLU #], then PRESS the [PLU] key. *PRICE*
2. PRESS the [AMT TEND/TOTAL] key. PLU No 001 *1.00 T1
3. The word *PRICE* appears above the PLU *0.06 T1
description or PLU #. -----------------------------------------
TOTAL *1.06
CASH *1.06
AM 2-07 0006