65
TRANSACTION EXAMPLES FOR OPERATING THE CASH REGISTER
NOTE: Turn the key to the "REG" (REGISTER) position for registering sales transactions.
IMPORTANT: It is not necessary to press the Decimal Point when ringing up a price.
REMINDER: If Clerk Numbers are programmed, be sure to ENTER the (CLERK #), then PRESS the
[CLERK/FS SHIFT] key before ringing up a sale.
In the examples below, Department 1 is programmed as taxable with a 6% (TAX 1) rate and Clerk #1 is used.
EXAMPLE 35: VOIDING A PLU SALE - (Assume PLU #1 is preset for the price of $1.00 in Department 1. Void PLU
#1):
10-15-2002 MC #:1234
1. ENTER (1), PRESS the [VOID] key, then
PRESS the [PLU] key. VOID/CORR
2. PRESS the [AMT TEND/TOTAL] key. PLU No 001 *-1.00 T1
*-0.06 T1
-----------------------------------------
TOTAL
*-1.06
CASH *-1.06
AM11-15 0041
EXAMPLE 36: VOIDING A PLU MULTIPLICATION SALE - (Assume PLU #1 is preset for the price of $1.00 in
Department 1. Void PLU #1 three times):
10-15-2002 MC #:1234
1. ENTER (3), then PRESS the [QTY/DATE] key. 3 X
2. ENTER (1), PRESS the [VOID] key, then PRESS 1.00 @
the [PLU] key. VOID/CORR
3. PRESS the [AMT TEND/TOTAL] key. PLU No 001 *-3.00 T1
*-0.18 T1
-----------------------------------------
TOTAL
*-3.18
CASH *-3.18
AM11-15 0040
EXAMPLE 37: VOIDING A PLU SALE WITH A COUPON DISCOUNT - (Assume PLU #1 is preset for the price of
$1.00 in Department 1 and deduct a 20¢ coupon. Void this entry):
10-15-2002 MC #:1234
1. ENTER (1), PRESS the [VOID] key, then PRESS
the [PLU] key. VOID/CORR
2. ENTER (20), PRESS the [VOID] key, then PRESS PLU No 001 *-1.00 T1
the [CPN] key. VOID/CORR
3. PRESS the [AMT TEND/TOTAL] key. COUPON *0.20
*-0.06 T1
-----------------------------------------
TOTAL
*-0.95
CASH *-0.95
AM 9-31 0034
To Next Page
Loading...
