3 Phase Power Analyser / EN
31 09/30/16 Version No. 00
Press “STOP” key to stop recording data, press “START” key to resume recording data, but
maximum can be divide to 99 memory blocks, the current block number will be displayed
(01 ~ 99).
When the maximum block or maximum capacity is full, the “DATA FULL” symbol will be
displayed and data recording is automatically stopped.
4. Download data to PC
Please refer to the software manual (CD-ROM) to download the data.
5-10 Phase Sequence Measurement
L1, L2, L3 : Phase 1, Phase 2, Phase 3, N: Neutral, G : Ground, Face the current probe
arrows toward the load
I4I3
I1 I2
N
U1 U2
Ⅲ
U3
Figure 16. 3P4W Phase Sequence Connection Diagram
To Next Page
Loading...
