3 Phase Power Analyser / EN
3 09/30/16 Version No. 00
II. INTRODUCTION
The IPM 3600N is a 3 phase power analyser for portable measurement within public mains
supplies.
The analyzer can be used to analyse and trouble shoot power quality issues, improve power
efficiency, manage energy costs, analyze harmonics, optimize power system performance,
improve power quality and analyze system data to design optimal upgrades.
Features
• 10 display LCD screen, capable of showing many power quality parameters at the same time.
• 4 current probes included for measuring 3 phase and neutral line current.
• Measures single-phase 2-wire, single-phase 3-wire, three-phase 3-wire and three-phase 4-wire
systems.
• All true-RMS sensing, V, A, KW, KVAR, KVA, PF, θ, Hz, KWh, KVARh and KVAh measurements.
• Phase sequence indicator function.
• Backlight display function.
• Manual Data Memory and Read (50 sets).
• Data logging (micro SD CARD 4GB).
• USB optical PC interface with three phase voltage / current waveform display and harmonic
analysis.
Supplied accessories
• ICA 3600N AC current probe x 4
Category Rating: CAT III 600V per IEC61010-1, Pollution Degree2.
: IEC 61010-1 2nd Edition and IEC61010-2-032
Input : AC 1000A maximum.
Output : 0.35mV/A
• Voltage test lead x 4
Model no : TL 202I
Manufacturer : Hong Kai Co., Ltd.
Category Rating : CAT III, 1000V AC 10A Max.
• Alligator clip x 4
Model no : FC-A26
Manufacturer : Fu Chyi Enterprise CO., Ltd.
Category Rating : CAT III, 1000V AC 10A Max.
• AC Adaptor (IN-OUT Isolated type, Input 230V AC 50Hz)
Model : MWD48-1200300GS
Input : 230V AC 50Hz
Output : 12V DC 300mA
Manufacturer : MAW WOEI Enterprise CO., Ltd.
• Battery 1.5V “AA” x 8
• Instruction manual x 1
• PC software CD-R x 1
• Carrying case x 1
• Optical USB interface x 1
To Next Page
Loading...
