2018-06-20/1.11A
Piranha/Cobia & Quick Check Getting Started
Quick Check
26
1.5 Applications with analysis
There are also a number of applications available in Quick Check. An application is a predefined measurement
where your data are analyzed, it might also include pass/fail criteria. The applications available in Quick Check
are not possible to modify in any way. If you have more needs, use Ocean Professional. You can then create
tests with user-defined calculations and pass/fail criteria. You will find applications for:
· Accuracy
· Reproducibility
· mA linearity
· HVL
· CTDI
1. You start an application by clicking on the Application button (if the button is not enabled, no applications
are available for current mode):
2. A menu showing available applications is shown:
3. Chose an application, for example kVp Accuracy. The screen layout is different for the application compared
to a standard Quick Check measurement. In this case there are no displays only grid (exposure list) is shown.
There is also an analysis that perform some kind of calculation (in this case kVp accuracy) on your measured
data.
To Next Page
Loading...
Need help?
General
