2018-06-20/1.11A
Piranha/Cobia & Quick Check Getting Started
Quick Check
34
Report template
You may want to change the report layout, for example, use you own logo. You can make you own report
layout and assign it as default for Quick Check. You can do this in Program Options and you can find
instructions in section Create a report template.
1.10 Transfer data to Excel
You can transfer data from Quick Check to Excel in three different ways:
· Connect to an Excel workbook. Measured data, are for each exposure, transferred to Excel starting in active
cell. Used template determine data format.
· Connect to an Excel workbook. Measured data, are for each exposure, transferred to Excel starting in active
cell. Use a fixed data format (compatible with Excel templates used with Xi and X2 View).
· Send current measured data to Excel. The data dump starts in active Excel cell.
Connect (Standard mode)
When this mode is used, data are transferred to Excel in the same order as the columns are appearing in the
template. Only numerical values are sent to Excel, no units or waveforms.
Data are send according to how columns appear in the template.
Connect (Fixed format mode)
This is same as "Standard mode" but data is sent in a different format. The format is compatible with the
format used with Xi and X2 View from RaySafe. Same Excel templates can be used with none or minimal
modifications. This mode is only available in Quick Check. It is activated by checking "Fixed format (Excel
connect)" on the Option page (in Quick Check). The format is described in the section Connect (Fixed
format).
To Next Page
Loading...
