2018-06-20/1.11A
Piranha/Cobia & Quick Check Getting Started
Quick Check
6
1. Press the power button and keep it pressed until the screen shows the following:
2. Release the button and slide the panel down to shut down the Tablet.
1.2 First measurement with Quick Check
By default, Quick Check is launched automatically when Ocean 2014 starts and the meter is available. Use
Quick Check when you just want "a meter" to do a quick measurement. Quick Check is extremely simple to
use since it automatically recognizes what type of meter you have and which detectors you use. It is full plug-
and-play, directly when you unplug or plug in a detector; Quick Check sets up the measurement for you. You
can save data you measure with Quick Check but you must save manually - Quick Check will never ask you if
you want to save. It is also possible to print and export measured data to Excel. Quick check also has built-in
applications for accuracy, linearity, reproducibility, half-value layer and more. Quick check is designed for use
with a tablet and easy to operate directly on a touch screen.
Let us start with a simple measurement to illustrate how to use Quick Check. This example assumes a Piranha
657. If you have another model follow this example and apply it on what you see on your screen when you
use your Piranha.
Make sure your meter is powered on and within distance for Bluetooth communication or connected via USB.
Disconnect any external probe that might be connected (unless you have a Piranha model that only works
with external detector or a Cobia Sense). Assume that we are using a Piranha 657.
1. Start Ocean 2014 or start the Quick Check from the Measure tab on the ribbon bar if you are in Ocean
2014 main view:
(Note: If you use Windows 8; you start Ocean 2014 from the desktop)
To Next Page
Loading...
Need help?
General
