2018-06-20/1.11A Piranha/Cobia & Quick Check Getting Started
7
Quick Check
2. Quick Check starts and a menu will be shown. The list is depending on your meter type, it might not
appear at all.
3. Select for example Radiography. For other modalities from here and on; it may be several choices to make
before the measurement screen appear. For example, for mammography you must chose calibration and if
compression plate is used or not.
4. The measurement loads and you are ready to start to measure.
If the selected Quick Check is using a calibration that isn't available in your meter/detector, a dialogue is
shown. You can here select another calibration instead of the one saved in the document.
To Next Page
Loading...
Need help?
General
