2018-06-20/1.11A Piranha/Cobia & Quick Check Getting Started
17
Quick Check
The list with all calibrations may look like this (the exact look depends on actual calibrations available in the
meter):
Change number of decimals
You can change number of decimals in the same way by right-clicking on the numeric value in a display.
1.4 Change Meter Settings
Piranha and Cobia have slightly different meter settings but the way you access and change them is the same.
Cobia has less settings, since it has auto-range and is a less advanced meter than Piranha. Quick Check will
recognize which meter you use and what its capabilities are and adapt to it. You will only see what you can
use and you can without any changes switch between Piranha and Cobia.
To Next Page
Loading...
Need help?
General
