2018-06-20/1.11A
Piranha/Cobia & Quick Check Getting Started
Quick Check
32
2. Go to the "Quick Checks" folder, double-click on the measurement you want to re-open.
You can also open a Quick Check measurement as an Real-time display in Ocean 2014 if you want to modify
it. To open as a real-time display:
1. Open the measurement folder.
2. Right-click on the Quick Check measurement you want to open as a real-time display.
3. The measurement will open in Ocean 2014 as a real-time display. You can now modify the measurement,
what you can do depends on the license level you have. If you open a Quick Check measurement that has
analysis with only Connect license, the analysis will not be visible.
1.9 Print
You can print your measured data (or create a PDF file). By default no waveform are included in the report.
To include waveforms do the following:
1. Go to the list view.
To Next Page
Loading...
