2018-06-20/1.11A Piranha/Cobia & Quick Check Getting Started
47
Quick Check
Select "Options".
There are three sections here:
Preferred modality
You can use this if you have a meter that covers many modalities but you don't want to see all choices in the
Quick Check.
Auto Position Check
Specify in which situations you want Quick Check to automatically suggest a Position Check.
Defaults
Various settings that controls how Quick Check works.
Exposure unit: Select Gray or Roentgen
Language: select the language you want for the Quick Check.
Auto-start with USB: If this is checked, Ocean 2014 and Quick Check starts automatically as soon as the
meter is connected with USB. Quick Check also terminates automatically when the meter is disconnected or
powered off.
Exposure assistant: Turn on or off the Exposure assistant.
Show hints automatically: If a Quick Check template has a hint attached to it, the hint is shown
automatically if this checkbox is checked.
Confirm exit: If you check this a dialogue is shown when you quit Ocean 2014. It give you three
alternatives:
· Quit Ocean 2014 and return to Windows
· Quit Ocean 2014 and turn off computer
· Resume Ocean 2014
Only use Quick Check: If you check this box, Ocean 2014 main window is hidden and you will only see the
Quick Check. Ocean only starts if meter is available.
Close the Options screen by sweeping right if you use a tablet or click on the close button.
To Next Page
Loading...
Need help?
General
