29
Configuring the Access Point
Configuring for Standalone Operation or for Management by FlexMaster
Configure Wireless # Settings
1. Click one of the Wireless # tabs.
2. In Wireless Availability, click Enabled.
3. In Broadcast SSID, click Enabled.
4. Clear the SSID box, and then type a unique and descriptive name that you want to call
this wireless network.
For example, you can type Ruckus Wireless AP. This SSID is the name that will
help users identify this wireless network in their wireless network connection applica-
tion.
NOTE: You may also configure other wireless settings on this and other Wireless # tabs
(in addition to the settings described above), although it is not necessary for completing
the Access Point installation.
5. Click Update Settings.
You have completed configuring the basic wireless settings of the Access Point.
Figure 24. The Configuration > Radio 2.4 > Wireless 1 tab
To Next Page
Loading...
