VLT
Vertical Process Pump
11 V1.090418
Moreover, the plant operator is to make sure that the contents of the operating manual are fully
understood by the personnel.
2.3 HAZARDS IN THE EVENT OF NON-COMPLIANCE WITH THE SAFETY INSTRUCTIONS
Non-compliance with the safety instructions may produce a risk to the personnel as well as to the
environment and the unit and results in loss of any right to claim damages.
Non-compliance may involve the following hazards:
• Risk of injury or death.
• Failure of important functions of the machine/plant.
• Exposure of people to electrical, mechanical, chemical, and thermal hazards.
• Endangering or damaging the environment due to hazardous substances being released.
2.4 COMPLIANCE WITH REGULATIONS PERTAINING TO SAFETY AT WORK
When operating the pump, the safety instructions contained in this manual, the relevant national
accident prevention regulations, local and federal health and safety regulations, quality system
requirements, and any other service and safety instructions issued by the plant operator must be
observed.
2.5 SAFETY INSTRUCTIONS RELEVANT FOR OPERATION
If hot or cold machine components involve hazards, they must be guarded
against accidental contact (attach warning signs).
Guards for moving parts (e.g. coupling) must not be removed from the
machine while in operation (mounting must be possible only with tools).
Any leakage of hazardous fluids must be drained away to prevent any risk to
persons or the environment. Statutory regulations are to be complied with.
Hazards resulting from electricity must be prevented.
To Next Page
Loading...