Ruhrpumpen VLT - 9 Spare Parts

VLT
Vertical Process Pump
73 V1.090418
9. SPARE PARTS
The spare parts list given below indicates the minimum quantity of spare parts to meet regular
conditions of constant operation for the given time periods.
 The quantities of spare parts given on the list below are the minimum standard
quantities to be had. However, these quantities may vary depending on
individual working conditions. For more information, please contact a
Ruhrpumpen representative.
DESCRIPTION
STARTUP
1 - 3 YEARS
+ 3 YEARS
Impeller
One per stage
Shaft
1
Bowl wear ring
One per stage
One per stage
Impeller wear ring
One per stage
One per stage
Suction bowl bushing
1
1
Intermediate bowl bushing
One per stage
One per stage
Stuffing box bushing
1
1
Column bushing
1
1
Gasket kit (includes O-rings and gaskets)
1
1
1
Startup spare parts should be available from the time of first operation.
Spare parts taken out and used must be replaced as soon as possible.
Please give the following details when ordering:
• Order No. of the pump.
• Type of pump and size.
• Identity number from the list of spare parts.
• Part number from the sectional drawing.
• Quantity.