RuiDa RDC644XG User Manual

User
’
s Manual of RDC644XG Control System
SHENZHEN RUIDA TECHNOLOGY
41
8.3.8 Def Fact Para
After the
“
Def Fact Para
”
is selected and the Enter key pressed, the
“
Successful Recovery
”
dialog
box will pop up to prompt that all manufacturer parameters and user parameters are recovered
successfully. You can return to the previous menu by press the Enter key.
8.3.9 Auto Focus
When the cursor stops at “Auto Focus”, press the Enter key to search for the focus(When there is
z axes, and the z axes reset function is enabled, the auto focusing is valid); press the Esc key to
return the prior menu.
8.3.10 Language
The item “Language” helps you to select a appropriate langue which is displayed on the
pane:
8.3.11 IP Setup
When the green block is on this item, push the
“
Enter
”
key to show as below:
Figure 8.3-7

RuiDa RDC644XG Specifications

General

Brand	RuiDa
Model	RDC644XG
Category	Controller
Language	English