RuiDa RDC644XG User Manual

User
’
s Manual of RDC644XG Control System
SHENZHEN RUIDA TECHNOLOGY
32
 :Set the max laser power of the current running layer, or set the power of
“
Laser
”
Key;
 :Set the min laser power of the current running layer;
 :To start or pause the work;

:To move the X axes or the left/right cursor

:To move the Y axes or the up/down cursor;

:The Z/U key can be pressed when the system is idle
or the work is finished. On pressing this key, it will show some entries in the interface,
each entry includes some functions, Z axes move, U axes move, each axes to go home
etc.;
 “ :To stop work, or to exit to some menu;
 : Validate the change;
8.2 Introduction to the Main Interface
8.2.1 The main interface
When the system is powered on, the screen will show as below:
Max.
Power
Min.
Power
Start/
Pause
Esc
Enter

RuiDa RDC644XG Specifications

General

Brand	RuiDa
Model	RDC644XG
Category	Controller
Language	English