RuiDa RDC644XG User Manual

User
’
s Manual of RDC644XG Control System
SHENZHEN RUIDA TECHNOLOGY
44
When showing this menu, the system would read the memory file firstly, the file name and
the work times would be listed in the area, and the selected file is previewed in the bottom right
area.
“
Y+/-
”
keys could be used to move the cursor on the file name list. When the cursor is on a
target file name, presses the “Enter” key, the selected file will be previewed on the main interface,
and then if “Esc” key is pushed, the preview will disappear.
“
X+/-
”
keys could be used to move the cursor left and right. All the item show as below:
 Read mem file: read the memory file list;
 Udisk: read the U disk file list;
 Other: the other operation of the memory files;
 Run: To run the selected file;
 Track: To track the selected file, and the track mode is optional;
 Work time: To forecast the running time of the selected file, and the time is
accurate to 1ms;
 Clear count: To clear the running times of the selected file;
 Delete: To delete the selected file in the memory;
 Copy to Udisk: To copy the selected file to Udisk;
If the
“
Other
”
entry is pressed, the system will show as below:
Figure 8.4-1

RuiDa RDC644XG Specifications

General

Brand	RuiDa
Model	RDC644XG
Category	Controller
Language	English